HP ml310 Manuel D’Utilisation
Server component identification
17
Item LED
description
Status
1
Activity status
On = Drive activity
Flashing = High activity on the drive or
drive is being configured as part of an
array.
drive is being configured as part of an
array.
Off = No drive activity
2
Online status
On = Drive is part of an array and is
currently working.
currently working.
Flashing = Drive is actively online.
Off = Drive is offline.
3
Fault status
On = Drive failure
Flashing = Fault-process activity
Off = No fault-process activity
Hot-plug SCSI hard drive LED combinations
Activity
LED (1)
LED (1)
Online
LED (2)
LED (2)
Fault LED
(3)
(3)
Interpretation
On, off, or
flashing
flashing
On or off
Flashing
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
On, off, or
flashing
flashing
On
Off
The drive is online and is configured as part of an array.
If the array is configured for fault tolerance and all other drives in
the array are online, and a predictive failure alert is received or a
drive capacity upgrade is in progress, you may replace the drive
online.
the array are online, and a predictive failure alert is received or a
drive capacity upgrade is in progress, you may replace the drive
online.
On or
flashing
flashing
Flashing Off
Do not remove the drive. Removing a drive may terminate the
current operation and cause data loss.
current operation and cause data loss.
The drive is rebuilding or undergoing capacity expansion.
On Off Off Do not remove the drive.
The drive is being accessed, but (1) it is not configured as part of an
array; (2) it is a replacement drive and rebuild has not yet started; or
(3) it is spinning up during the POST sequence.
array; (2) it is a replacement drive and rebuild has not yet started; or
(3) it is spinning up during the POST sequence.