HP ml310 Manuel D’Utilisation
36
HP ProLiant ML310 Generation 3 Server User Guide
To install the component:
1.
Power down the server ("Powering down the server" on page
2.
3.
Remove the access panel ("Removing the access panel" on page
4.
Disconnect the fan cable from the system board ("System board components"
on page
5.
Open the processor retaining bracket.
6.
Place the processor into the processor socket.
7.
Close the processor locking lever.
CAUTION: To prevent possible server malfunction or damage to
the equipment, be sure to completely close the processor locking lever.
8.
Prepare the heatsink for installation:
–
If reusing the heatsink, clean the bottom of the heatsink with the provided
alcohol pad, then apply a thin layer of thermal grease to the top of the
processor.
processor.
–
If installing a new heatsink, remove the protective covering.
9.
Install the heatsink fan assembly.
10.
Tighten the four heatsink retaining screws.