HP pavilion dv1000-compaq-presario-v2000-nx4800 Instruction De Maintenance

Page de 238
B–2
Maintenance and Service Guide
Power Cord Set Requirements
General Requirements
The requirements listed below are applicable to all countries.
The length of the power cord set must be at least 1.5 m 
(5.0 ft) and a maximum of 2.0 m (6.5 ft).
All power cord sets must be approved by an acceptable 
accredited agency responsible for evaluation in the 
country where the power cord set will be used.
The power cord sets must have a minimum current capacity 
of 10 amps and a nominal voltage rating of 125 or 250 V AC, 
as required by each country’s power system.
The appliance coupler must meet the mechanical 
configuration of an EN 60 320/IEC 320 Standard Sheet C13 
connector for mating with the appliance inlet on the back of 
the computer.