HP photosmart m730 series Manuel D’Utilisation

This camera supports standard, high speed, and high capacity Secure Digital (SD and
SDHC) memory cards, 32MB to 8GB.
1. Turn off the camera and open

the Battery/Memory Card door.

2. Insert the memory card in the

smaller slot as shown. Make
sure the memory card snaps
into place.

3. Close the Battery/Memory

Card door and turn on the
camera.

When you turn on your

camera with a memory card
installed, the camera indicates
the number of images you can
store on the memory card at the
current 

 Image Quality

setting. This camera supports
storing a maximum of 1999
images on a memory card.

Always format new memory cards before first use. Formatting removes all images from
the memory card, so make sure to transfer existing images before formatting (see

).

1. With the camera turned on, slide 

 to 

.

2. Press  .
3. Use 

 to select Format Card, then press 

.

4. Use 

 to select Yes, then press 

 to format the card.

Once you install a memory card, all new images and video clips are stored

on the card, rather than in internal memory. To use internal memory and view images
stored there, turn off the camera then remove the memory card. To transfer images
from internal memory to an optional memory card, see Move Images to Card
under 

.

For information about supported memory cards, see 

The HP Photosmart Software provides features for transferring images and video clips
to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, and more).
To install the HP Photosmart Software, your computer must meet the system
requirements as stated on the camera packaging.
If you have trouble installing or using the HP Photosmart Software, see the Hewlett-
Packard Technical Support website for more information: 

. Known

issues are often fixed with new releases of firmware. To optimize your digital photography

Chapter 1

6

Getting started