HP procurve 2500 Manuel D’Utilisation
136
Enhancements in Release F.04.08
Using the "Kill" Command To Terminate Remote Sessions
Using the "Kill" Command To Terminate Remote Sessions
Using the
kill command, you can terminate remote management sessions. (Kill does not terminate a
Console session on the serial port, either through a direct connection or via a modem.)
Syntax:
kill [<session-number>]
For example, if you are using the switch’s serial port for a console session and want to terminate a
currently active Telnet session, you would do the following:
currently active Telnet session, you would do the following:
Figure 64. Example of Using the "Kill" Command To Terminate a Remote Session
Session 2 is an active
Telnet session.
Telnet session.
The kill 2 command
terminates session 2.
terminates session 2.