HP proliant dl580 Manuel D’Utilisation
Removal and replacement procedures 41
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
1.
2.
Back up all server data on the hard drive to be removed.
3.
Remove the hard drive.
To replace the component, reverse the removal procedure.
Removing a hot-plug SAS hard drive
CAUTION: Always power down the server if the boot partition resides on the drive you are replacing or if
you are replacing the only drive in the server.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
1.
Determine the status of the hard drive from the hot-plug hard drive LEDs ("
2.
Back up all server data on the hard drive to be removed.