HP qms 4060 Manuel D’Utilisation
Emulations
QMS 4060 Print System Reference
4-62
Default Font Index
Sets the Default Font Index when the Default Font is set to
selectbyindex.
selectbyindex.
Default
Off
Notes
A retained state is cleared if you do any of the
following:
following:
n
Explicitly clear the PCL state by sending an
<ESC>E or Printer Job Language.
<ESC>E or Printer Job Language.
n
Turn off the printer. (Note that if Retain Tempo-
rary is set to On or On Compatibility and power
is turned off and back on again, all temporary
objects on the disk’s standard resource will
become permanent. RAM-based temporary
objects are lost).
rary is set to On or On Compatibility and power
is turned off and back on again, all temporary
objects on the disk’s standard resource will
become permanent. RAM-based temporary
objects are lost).
n
Change any PCL front panel option.
n
Send any PCL-specific DOC commands (except
the DOC emulation command).
the DOC emulation command).
n
Send a PCL job from a different communications
port. For example, the state set up by a PCL job
using the parallel port is cleared if a subsequent
PCL job arrives at the serial port)
port. For example, the state set up by a PCL job
using the parallel port is cleared if a subsequent
PCL job arrives at the serial port)
.
Menu
Administration/Emulations/PCL E/Default Font Idx
Choices
0 to 32767
Default
00000
Note
The index number can be obtained by the listing
printed on the advanced status page. See “Printing a
Status Page” on page 4-74, for status page details.
printed on the advanced status page. See “Printing a
Status Page” on page 4-74, for status page details.