Canon DR-2050C Manuel D’Utilisation
52
Using the Scanner
Other Functions
This scanner also supports the scanning functions described below.
Scanning Folio (Folded Document)
The scanner uses a folio scanning method to scan documents that are bigger
than LTR/A4 size (maximum A3 size). To do folio scanning, fold the
document in half and place it on the scanner. Both sides of the folded
document are scanned and combined into a single image.
than LTR/A4 size (maximum A3 size). To do folio scanning, fold the
document in half and place it on the scanner. Both sides of the folded
document are scanned and combined into a single image.
(Front)
(Back)
(Combined Image)
IMPORTANT
• Attach the Document Guide Adaptors to prevent documents from skewing
when doing folio scan. (See p. 44.)
• Use nonseparated document scanning when doing folio scan.
• Firmly set the fold in the document. The fold in the document may cause
• Firmly set the fold in the document. The fold in the document may cause
paper jams or misaligned images.
Note
• Folio scanning is set in the ISIS/TWAIN driver.
• The image on the front of the folded document appears as the right side of
• The image on the front of the folded document appears as the right side of
the image.
• Combined images can be a maximum of A3 size.
• A seam may appear where the images are combined if the document or the
• A seam may appear where the images are combined if the document or the
fold in the document is crooked.
• When scanning a document that is folded in half, position the fold on the
right side (q) and raise the Feed Selection Lever (w).
• When scanning multiple documents that are folded in half, set sheets into
the scanner one-by-one.