Canon faxphone l75 Manuel D’Utilisation

❏ Does some of the document content not fit on the page?

Make sure paper is aligned correctly in the multi-purpose tray. Check 
that margins and paper size are set correctly in your printing application. 
Also, check that the scaling is set appropriately in the printer driver 
settings. The scaling may be set to enlarge the document page to a size 
that is too large for the paper.

❏ Is printing not clear?

Check the print resolution. A higher resolution prints more clearly.

❏ Do fonts not print smoothly?

Bitmapped fonts designed for dot matrix printers will not look smooth 
when printed by your high-resolution printer. Choose another font. Make 
sure you install an outline font manager such as Adobe Type Manager or 
Bitstream Facelift, or that you choose a TrueType font.

❏ Is the printing not dark enough?

Check the print settings, such as the print resolution, brightness, contrast, 
and toner saver. Try replacing the toner cartridge.

❏ Did a toner low warning appear while printing?

If you want to continue printing your document, even though you are 
low on toner, change the TONER SUPPLY LOW setting on the printer 
from RX TO MEMORY to KEEP PRINTING. (Even if the toner cartridge 
is out of toner, the document will not be stored in memory.)

❏ Do vertical white streaks appear?

Vertical white streaks may appear when the error message REPLACE 
CARTRIDGE is displayed. This situation indicates that the toner level is 
low or that the toner is unevenly distributed in the cartridge.

To resolve the situation, open the printer cover and remove the toner 
cartridge. Gently rock the cartridge from side to side five or six times to 
evenly distribute the toner inside. Replace the cartridge in the printer, 
and close the printer cover.

If redistributing the toner does not resolve the situation, replace your 
cartridge.

MP330.book  Page 7  Tuesday, October 22, 2002  3:21 PM