Canon imagerunner 2010f Manuel D’Utilisation

Collating Copies

Basic Cop

ying F

eatures

● If you want to set the Rotate mode:

❑

Make sure you have set SORT ROTATE in Copy Settings (from the Additional 
Functions menu) to ‘01 ON’ before making copies. 
(See “Sort Rotate,” on p. 4-9.) 

❑

Proceed to step 3.

IMPORTANT

• The Rotate Collate mode can be used when:

- Available paper size is set both horizontally and vertically in the paper drawers 

and stack bypass 

- DRAWER ELIGIBLTY in Common Settings (from the Additional Functions menu) 

is set to ‘02 ON’ for the paper drawer and stack bypass designated for the Rotate 
Collate mode. (See Chapter 4, “Selecting and Storing Settings,” in the Reference 
Guide.)

• If the Finisher-L1 (optional) is attached, the Rotate Collate mode cannot be set.

● If you want to set the Offset mode:

❑

Set SORT ROTATE in Copy Settings (from the Additional Functions menu) to 
‘01 ON’ before making copies. (See “Sort Rotate,” on p. 4-9.)

❑

Proceed to step 3.

IMPORTANT

• If the optional finisher is attached, the Offset Collate mode is set automatically.

• The Offset Collate mode can be set only if the optional finisher is attached.

For details about entering the copy quantity, see “Specifying the Required 
Number of Copies,” on p. 2-2.

If the original is placed on the platen glass, follow the instructions that appear on 
the display 

➞ press 

 (Start) once for each original. When scanning is 

complete, press 

 (OK).

Copying starts.