Canon pixma ip4300 Manuel D’Utilisation

Page de 102
90
Safety Precautions
Working around the 
printer
Do not use highly flammable sprays near the printer.
This could cause a fire or electric shock if the spray comes into contact with electrical components 
inside the printer.
Caution
You may cause injury or damage the printer if you ignore any of these safety precautions.
Choosing a location
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or 
close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient 
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet.
Do not place the printer with its back attached to the wall.
Power supply
Ensure that the area around the power outlet is kept clear at 
all times so you can easily unplug the power cord if 
necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/cord.
Never use a power supply source other than the one rated for the printer in the country of where 
you purchased the printer.
AC 100-240 V, 50/60 Hz
Working around the 
printer
Never put your hands or fingers in the printer while it is printing.
Do not place any object on the printer.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol, 
thinners, etc.) on top of the printer.
If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for service.
Do not transport or store the printer on a slant, vertically or upside-down, as the ink may leak and 
damage the printer.
downloadlike
ArtboardArtboardArtboard
Report Bug