Canon powershot a2500 black 8253b001 Manuel D’Utilisation

30

If the camera is turned on while the <

p> button is held down, the 

camera will no longer sound. To activate sounds again, press the 

<

n> button and choose [Mute] on the [3] tab, and then press 

the <

q><r> buttons to choose [Off].

A flashing [ ] icon warns that images are more likely to be blurred 

by camera shake. In this case, mount the camera on a tripod or take 

other measures to keep it still.

If your shots are dark despite the flash firing, move closer to the 

The subject may be too close if the camera only beeps once when 

you press the shutter button halfway. For details on the focusing 

To reduce red-eye and to assist in focusing, the lamp may be 

activated when shooting in low-light conditions.

A blinking [

h] icon displayed when you attempt to shoot indicates 

that shooting is not possible until the flash has finished recharging. 

Shooting can resume as soon as the flash is ready, so either press 

the shutter button all the way down and wait, or release it and press 

it again.

You can change how long images are displayed after shots (

z

z

Press the movie button. The camera 

beeps once as recording begins, and 

[●Rec] is displayed with the elapsed time.

X

X

Black bars displayed on the top and 

bottom edges of the screen indicate 

image areas not recorded.

X

X

Frames displayed around any detected 

faces indicate that they are in focus.

z

z

Once recording begins, take your finger 

off the movie button.

z

z

To resize the subject, repeat the 

operations in step 3 (

However, note that the sound of camera 

operations will be recorded, and movies 

shot at zoom factors shown in blue will 

look grainy.

z

z

When you recompose shots, the 

focus, brightness, and colors will be 

automatically adjusted.

z

z

Press the movie button again to stop 

shooting. The camera beeps twice as 

recording stops.

X

X

Recording will stop automatically when 

the memory card becomes full.

Elapsed Time