Samsung pl-42q91hp Manuel D’Utilisation

English-25

Your TV has three automatic picture settings (“Dynamic”, “Standard”, and “Movie”) that are preset at the factory. 
You can activate either Dynamic, Standard, or Movie by making a selection from the menu.

1. Press the MENU button to display the menu.

Press the ENTER button to select “Picture”.

2. Press the ENTER button again.

Press the …

… or †

† button to select the “Dynamic”, “Standard”, or “Movie” 

picture setting, then press the ENTER button.

➢

Picture mode needs to be adjusted separately for each input.

3. Press the …

… or †

† button to select “Contrast”, “Brightness”, “Sharpness”, 

“Color”, or “Tint”, then press the ENTER button.

4. Press the œ or √ button to decrease or increase the value of a particular item. 

➢

• In PC mode, only the Contrast and Brightness can be selected.
• Each adjusted setting will be stored separately according to its input mode.

5. Press the ENTER button to return to “Mode”.

6. Press the …

… or †

† button to select “Color Tone”, then press the ENTER button.

7. Press the …

… or †

† button to select “Cool2”, “Cool1”, “Normal”, “Warm1”,

or “Warm2”, then press the ENTER button.
➢

When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be 
selected. Movie mode is only available.

 Choose Dynamic for viewing the TV during the day or when there is a bright light in 

the room.

 Choose Standard for general TV watching mode.

 Choose Movie when viewing a movie.

Press the P.MODE button on the remote control to select one of the standard picture
settings.

8. Press the …

… or †

† button to select “Reset”, then press the ENTER button.

9. Press the …

… or †

† button to select “OK” or “Cancel”, then press the ENTER button. 

Press the EXIT button to exit.
➢

Each picture mode can be reset.

BN68-00866X-00Eng_0326  3/26/07  10:13 AM  Page 25