Samsung pl-42q91hp Manuel D’Utilisation

English-45

Using this function, you can adjust the image quality when the screen burn (appearance of black level, low
contrast, low color, etc.) is encountered by the HDMI input for RGB limited range (16 to 235).

1. Press the MENU button to display the menu.

Press the …

… or †

† button to select “Setup”, then press the ENTER button.

2. Press the …

… or †

† button to select “HDMI Black Level”, then press the ENTER button.

3. Press the …

… or †

† button to select “Normal” or “Low”, then press the ENTER

button.

Press the EXIT button to exit.
➢

This function is active only when the externel input connects to HDMI(RGB signals).

If screen burn has occurred, you can select a white screen or signal pattern (rolling screen) to help remove screen burn artifacts.

1. Press the MENU button to display the menu.

Press the …

… or †

† button to select “Setup”, then press the ENTER button.

2. Press the …

… or †

† button to select “Screen Burn Protection”, then press the 

ENTER button.

3. Press the …

… or †

† button to select “All White”, “Signal Pattern”, or “Side gray”, then

press the ENTER button.

Press the EXIT button to exit.

➢

To remove after-images on the screen, use either the “All White” or “Signal Pattern” 
function. Although both functions remove after-images on the screen, “Signal Pattern” 
is more effective.

➢

The after-image removal function has to be executed for a long time (approximately 
1 hour) to effectively remove after-images on the screen. If the after-image is not 
removed after performing the function, repeat the function again.

➢

Press any key on the remote control to cancel this feature.

 All White: This function removes after-images on the screen by changing the 

color of pixels to white. Use this function when there are remaining 
after-images or symbols on the screen especially when you displayed 
a still image on the screen for a long time.

 Signal Pattern: This function removes after-images on the screen by moving all 

the pixels on the PDP according to a pattern. Use this function 
when there are remaining after-images or symbols on the screen 
especially when you displayed a still image on the screen for a 
long time.

 Side gray: When you watch TV with the screen ratio of 4:3, the screen is prevented 

from any damage by adjusting the white balance on both extreme left 
and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right 
sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right 
sides.

BN68-00866X-00Eng_0326  3/26/07  10:14 AM  Page 45