Samsung pl-42e91h Manuel D’Utilisation

English-24

Press the SOURCE button on the remote control to view an external signal source.

You can enter TV mode directly by using the TV button on the remote control.

You can enter HDMI mode directly by using the HDMI button on the remote control. 

Name the device connected to the input jacks to make your input source selection easier.

1. Press the MENU button to display the menu.

Press the …

… or †

† button to select “Input”, then press the ENTER button.

Press the …

… or †

† button to select “Edit Name”, then press the ENTER button.

2. Press the …

… or †

† button to select “AV”, “Component1”, “Component2”, “PC”,

or “HDMI” input jack, then press the ENTER button.

3. Press the …

… or †

† button to select “VCR”, “DVD”, “D-VHS”, “Cable STB”, 

“HD STB”, “Satellite STB”, “AV Receiver”, “DVD Receiver”, “Game”, 
“Camcorder”, “DVD Combo”, “DHR”, or “PC” input source, then press 
the ENTER button.

Press the EXIT button to exit.
➢

When a PC with a resolution of 640 x 480@60Hz is connected to the HDMI IN 1 port,
you should set the HDMI1 mode to PC in the Source List of Input mode. If the HDMI1
mode is not PC, it may work depending on the TV setting.

Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.

1. Press the MENU button to display the menu.

Press the …

… or †

† button to select “Input”, then press the ENTER button.

2. Press the ENTER button to select “Source List”.

Press the …

… or †

† button to select signal source, then press the ENTER button.

➢

You can choose between the following sets of jacks: AV, Component1, Component2, 
PC, HDMI on the TV’s rear panel.

➢

HDMI input can only be selected when the external device is turned on and connected 
via HDMI.

➢

You can choose only those external devices that are connected to the TV.

†

BN68-01374A-00Eng  8/27/07  2:55 PM  Page 24