Samsung ps-42c6hd Manuel D’Utilisation

Press the MENU (

) button to display the menu.

Press the … or † button to select Setup, then press the ENTER/OK (

) but-

ton.

Press the … or † button to select PC, then press the ENTER/OK (

) button.

Select the required option by pressing the … or † button, then press the
ENTER/OK (

) button.

Available options: Image Lock, Position, Auto Adjustment, Image Reset

When you are satisfied with your setting, press the ENTER/OK (

)  button.

Press the EXIT button to exit.

◆ Image Lock: Coarse/Fine

The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency 
as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned 
on the center of screen.

Press the … or † button to select Coarse or Fine, then press the 
ENTER/OK (

) button.

Press the œ or √ button to adjust the screen quality, vertical stripes may 
appear or the picture may be blurry. Press the ENTER/OK (

) button.

◆ Position:

Adjust the PC’s screen positioning if it does not fit the TV screen.

Adjust the position by pressing the …/†/œ/√ button.

Press the ENTER/OK (

) button.

◆ Auto Adjustment:

Auto adjustment allows the PC screen of set to self-adjust to the incoming 
PC video signal.
The values of fine, coarse and position are adjusted automatically.

◆ Image Reset:

You can replace all image settings with the factory default values.

➢

Preset to the PC mode by pressing the SOURCE (

)  button.

e)

BN68-01293F-00Eng  7/19/07  10:36 AM  Page 21