Samsung ps-42c6hd Manuel D’Utilisation

➢

To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following 

instructions:

Be sure to remove the safety pins underneath the PDP.

➢ 

If the safety pins are not removed, the angle cannot be

adjusted. Any attempt to do so may cause damage to 
the PDP.

Hold onto the bottom of the PDP and pull forward fully as
directed by the arrow as illustrated) to adjust the angle.
(0°~20° by 2°) Insert the Safety Pins to the front guide
holes on both sides as illustrated in figure @.

➢ 

Viewing the PDP after connecting the external devices

Remove the Safety Pins to adjust the angle to 0°, and 
then secure the Safety Pins again.

☛ 

For safety, be sure to secure the PDP using the safety 

pins. If the safety pins are not used, the PDP may fall, 
causing serious injury.

s

o

n

➢

Please secure the mounting bracket on the wall surface after setting its angle at 0°

Secure the SET to the wall mount bracket.(Please refer to the
follow ing instructions.)

Set the angle by pulling the upper end of the SET attached to
bracket in the direction of the arrow. (Refer to the illustration
on the right.)

The angle can be adjusted from 0° to 15° by ±2°.

Hold onto the middle of the PDP to
adjust the angle (not the sides of
the PDP).

BN68-01293F-00Eng  7/19/07  10:36 AM  Page 39