Samsung dynaflat tx r1635 Manuel D’Utilisation
14
I
N S TA L L AT I O N
3
Connect an S-video cable
between the S-VIDEO OUT
jack on the VCR and the
S-VIDEO IN jack on the
TV.
between the S-VIDEO OUT
jack on the VCR and the
S-VIDEO IN jack on the
TV.
An S-video cable is usually included with an S-VHS VCR. (If not, check your local
electronics store.)
electronics store.)
Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV
may be different.
may be different.
2
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
INPUT2 jacks on the TV.
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
INPUT2 jacks on the TV.
1
To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
Connecting an S-VHS VCR (Depends on the model)
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
VCR Rear Panel
TV Rear Panel
Coaxial Cable
VCR Rear Panel
TV Rear Panel
Audio Cable
VCR Rear Panel
TV Rear Panel
S-Video Cable