Samsung wf-j145n(v-c-s) Manuel D’Utilisation

 Washing Machine Owner’s Instructions 

The water supply hose must be connected to the washing machine at one end and to 

the water faucet at the other.  Do not stretch the water supply hose.  If the hose is too 

short and you do not wish to move the water faucet, replace the hose with a longer, 

high pressure hose.

To connect the water supply hose:

1.  Take the L-shaped arm fitting for the cold 

water supply hose and connect to the cold 

water supply intake on the back of the 

machine. Tighten by hand.

2.    Connect the other end of the cold water supply hose to your sink's cold water faucet 

and tighten it by hand.  If necessary, you can reposition the water supply hose at the 

washing machine end by loosening the fitting, rotating the hose, and retightening the 

fitting.

      1.   Take the red L-shaped arm fitting for the hot water supply hose and connect to the 

red hot water supply intake on the back of the machine. Tighten by hand.

      2.   Connect the other end of the hot water supply hose to your sink's hot water faucet 

and tighten it by hand.

      3. Use a Y-piece if you only want to use cold water.

  The appliance is to be connected to the water mains using new hose-sets and 

that old hose-sets should not be used.

The end of the drain hose may be positioned in three ways:

The drain hose must be placed at a height 
of between 60 and 90 cm.  To keep the drain 
hose spout bent, use the supplied plastic hose 
guide.  Secure the guide to the wall with a 
hook or to the faucet with a piece of string to 
prevent the drain hose from moving.

The drain pipe branch must be above the sink siphon so that the end of the hose is at least 

60 cm above the ground.

Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60 

cm and no longer than 90 cm.

WF-J145NC-02211A-GB.indd   4

2006-03-29   ｿﾀﾀ・10:42:29