Sony CDP-CE105
Playing CDs
Playing CDs
11
EN
5
To programme other discs or tracks, do the
following:
following:
To programme
Other discs
Other tracks on the same disc
Other tracks on other discs
6
Press ·P to start Programme Play.
To cancel Programme Play
Press CONTINUE.
You can create your programme while checking the
disc labels
disc labels
When the front cover is open, follow Steps 1 to 6 while
pressing DISC SKIP to check the disc labels.
Note that, if the programmed track number isn’t found
on the disc, that step is automatically erased.
pressing DISC SKIP to check the disc labels.
Note that, if the programmed track number isn’t found
on the disc, that step is automatically erased.
The programme remains even after Programme Play
ends
ends
When you press ·P, you can play the same
programme again.
programme again.
The programme remains until you erase it or turn off
the player
the player
If you exchange discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that aren’t found in the player or on the disc are
deleted from the programme, and the rest of the
programme is played in the programmed order.
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that aren’t found in the player or on the disc are
deleted from the programme, and the rest of the
programme is played in the programmed order.
Note
The total playing time doesn’t appear when:
—You have programmed a track whose number exceeds 20.
—The total playing time of the programme exceeds 200
—You have programmed a track whose number exceeds 20.
—The total playing time of the programme exceeds 200
minutes.
—Front cover is opened.
Changing the track order
You can change your programme before you start
playing.
playing.
To
Erase the last step in the
programme
programme
Change the whole
programme completely
programme completely
Playing CDs
Notes on CDs
On handling CDs
• To keep the disc clean, handle the disc by its edge. Do not
touch the surface.
• Do not stick paper or tape on the disc.
Additional Information
Repeat Step(s)
2
3 and 4
2, 3 and 4
Press
p. Each time you press the
button, the last step will be
cleared.
button, the last step will be
cleared.
p until “ALL CLr” appears
in the display. Create a new
programme following the
programming procedure.
in the display. Create a new
programme following the
programming procedure.
• Do not expose the disc to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in direct
sunlight as there can be considerable rise in temperature
inside the car.
sunlight as there can be considerable rise in temperature
inside the car.
• Do not use any commercially available stabilizer. If you do,
the disc and the player may be damaged.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning cloth. Wipe
the disc from the centre out.
Not this way
• Do not use solvents such as benzine, thinner, commercially
available cleaners or anti-static spray intended for vinyl
LPs.
LPs.