Sony CMT-MD1 Manuel D’Utilisation
5
Getting Started
3 (CMT-MD1 only)
Attach the speakers.
Facing the front of the system, attach
the speaker connected to the
SPEAKER R terminals onto the right
side of the system and the speaker
connected to the SPEAKER L
terminals onto the left side of the
system.
Afterwards, push down on the
speakers to make sure they are
securely fastened to the system.
Facing the front of the system, attach
the speaker connected to the
SPEAKER R terminals onto the right
side of the system and the speaker
connected to the SPEAKER L
terminals onto the left side of the
system.
Afterwards, push down on the
speakers to make sure they are
securely fastened to the system.
3
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
connect it.
2 (CMT-MD1 only)
Fasten the four screws to both sides of
the system.
the system.
5
After making sure that the cords are
correctly and securely connected,
reinstall the rear cover.
correctly and securely connected,
reinstall the rear cover.
Put the wires through the hole at the
bottom of the rear cover.
bottom of the rear cover.
4
For models with a voltage selector,
set VOLTAGE SELECTOR to the
position of your local power line
voltage.
set VOLTAGE SELECTOR to the
position of your local power line
voltage.
VOLTAGE SELECTOR
110-120V
220-240V
continued
Jack type A
Jack type B
FM
75
75
Ω
AM
y
COAXIAL
LOOP
ANTENNA
ANTENNA
AM loop
antenna
antenna
Extend the FM
wire antenna
horizontally
wire antenna
horizontally
FM
75
75
Ω
AM
y
COAXIAL
LOOP
ANTENNA
ANTENNA
AM loop
antenna
antenna
Extend the FM
wire antenna
horizontally
wire antenna
horizontally