Sony css-hd1 Manuel D’Utilisation

Page de 32
1-GB
CAUTION
Replace the battery with the specified type only. 
Otherwise, fire or injury may result.
Replacing the button type lithium 
battery
Do not use any batteries other than CR2025.
1
  Pull out the battery holder while pushing 
the tab on the holder.
  Take out the button type lithium battery 
from the holder.
  Put a new battery into the holder with its + 
side facing upward.
  Insert the holder into the remote control 
until it clicks.
*
Slide Show
You can playback a series of still images and movies 
recorded with your camera by only pressing the 
SLIDE SHOW button on the remote control.
1
  Turn on the power by pressing the 
(playback) button of the camera or the 
POWER button on the remote control.
  Press the SLIDE SHOW button on the 
remote control.
To cancel Slide Show
Press the SLIDE SHOW button on the remote 
control again.
You can change the settings of Slide Show 
([Interval], [Image], and [Repeat] etc.) with the 
settings on the camera. For further details, refer 
to the operating instructions supplied with the 
camera.
Care and maintenance
Clean the Cyber-shot Station with a soft cloth 
slightly moistened with water, and wipe the surface 
with a dry cloth. Do not use any type of solvent 
such as thinner, alcohol or benzine as this may 
damage the surface.
Changing the battery of the 
Remote Control
WARNING 
Battery may explode if mistreated. Do not recharge, 
disassemble, or dispose of in fire.
When the lithium battery becomes weak, the 
operating distance of the Remote Commander 
may shorten, or the Remote Commander may 
not function properly. In this case, replace the 
battery with a Sony CR2025 lithium battery. Use 
of another battery may present a risk of fire or 
explosion.
For the State of California, USA only
Perchlorate Material - special handling may apply, 
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains 
perchlorate.