Sony dav-hdz485 Manuel D’Utilisation
Dis
c
33
US
Playing a Disc
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
1
Turn on your TV.
2
Switch the input selector on the TV to
this system.
this system.
3
Press "/1.
The system turns on.
Unless the system is set to “DVD,” press
FUNCTION +/– to select “DVD.”
Unless the system is set to “DVD,” press
FUNCTION +/– to select “DVD.”
4
Press Z on the unit to open the disc
tray, and place a disc on the tray.
tray, and place a disc on the tray.
Place one disc on the tray, and then press Z.
Note
• When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
not skewed on the inner circle of the tray.
not skewed on the inner circle of the tray.
• Do not place more than one disc on the tray.
5
Press H.
The system starts playback (continuous
play).
play).
6
Adjust the volume by using VOLUME +/
– on the remote or the VOLUME control
on the unit.
– on the remote or the VOLUME control
on the unit.
The volume level appears on the TV screen
and in the front panel display.
and in the front panel display.
Note
• When you set the Control for HDMI function to on,
the TV that is connected to the system with an HDMI
cable can be sync-operated with the system. For
details, see “Using the Control for HDMI Function
for “BRAVIA” Sync” (page 60).
cable can be sync-operated with the system. For
details, see “Using the Control for HDMI Function
for “BRAVIA” Sync” (page 60).
To turn the system off
Press "/1 while the system is on. The system
enters standby mode.
enters standby mode.
To save power in standby mode
Press "/1 while the system is on.
To enter power saving mode, make sure that the
system is in the following status.
To enter power saving mode, make sure that the
system is in the following status.
– “DEMO” is set to “OFF” (page 25).
– [CONTROL FOR HDMI] is set to [OFF]
– “S-AIR STBY” is set to “STBY OFF”
Disc
"/1
Disc tray
FUNCTION
Adjust the volume
Connect
headphones
headphones
N
Z
OPERATION DIAL
"/1
FUNCTION
+/–
+/–
x
H
X
./>
MUTING
VOLUME +/–
/m/
M/
STEP
/
,
/
With the label side up.