Sony DCR-SR100 Manuel D’Utilisation

Approximate time (min.) available when you 
use a fully charged battery pack.

 

* When the LCD backlight turns on.

On the battery pack 
• Before changing the battery pack, slide the 

POWER switch to OFF (CHG).

• The CHG (charge) lamp flashes during charging, 

or BATTERY INFO (p.37) will not be correctly 
displayed under the following conditions.

– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged. 

(For BATTERY INFO only.)

• The power will not be supplied from the battery 

as long as the AC Adaptor is connected to the DC 
IN jack of your camcorder, even when the power 
cord is removed from the wall outlet.

• We recommend that you use an NP-FP70, NP-

FP71 or NP-FP90 battery pack when a video light 
(optional) is attached.

On the charging/recording/playback time 
• Times measured with the camcorder at 25 °C 

(77°F). (10-30°C (50-86°F) is recommended.)

• Available recording and playback time will be 

shorter when you use your camcorder in low 
temperatures.

• The available recording and playback time will 

be shorter depending on the conditions under 
which you use your camcorder.

On the AC Adaptor 
• Connect the AC Adaptor to an easily accessible 

wall outlet close by. If any trouble occurs while 
using the adaptor, immediately shut off the power 
by removing the plug from the wall outlet.

• Do not use the AC Adaptor placed in a narrow 

space, such as between a wall and furniture.

• Do not short-circuit the DC plug of the AC 

Adaptor or battery terminal with any metallic 
objects. This may cause a malfunction.

PRECAUTION 
• Even if your camcorder is turned off, AC power 

(house current) is still supplied to it while 
connected to the wall outlet via the AC Adaptor.

Battery pack

LCD screen 
opened*

LCD screen 
closed

NP-FP50

105

125

NP-FP60 
(supplied)

160

190

NP-FP70

225

265

NP-FP71

270

315

NP-FP90

400

475