Sony GV-HD700 Manuel D’Utilisation
13
G
e
tti
ng St
a
rte
d
2
Slide the OPEN
. lever and
open the LCD panel.
3
Set the POWER switch to OFF
(CHG) (The default setting).
(CHG) (The default setting).
4
Connect the AC Adaptor to the
DC IN jack on the VCR. Make sure
that the v mark on the DC plug is
facing to the v mark on the VCR.
DC IN jack on the VCR. Make sure
that the v mark on the DC plug is
facing to the v mark on the VCR.
5
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
lead) to the AC Adaptor and the
wall outlet (wall socket).
The POWER/CHARGE lamp turns on
orange and charging starts.
orange and charging starts.
The POWER/CHARGE lamp turns off
when the battery pack is fully charged.
After charging the battery pack,
disconnect the AC Adaptor from the
DC IN jack on the VCR.
when the battery pack is fully charged.
After charging the battery pack,
disconnect the AC Adaptor from the
DC IN jack on the VCR.
b
Notes
• The direction to attach the L series is different
from that of the M series (optional) (p. 14).
Make sure to attach your battery in the correct
direction. If you attempt to attach it in the wrong
direction forcibly, a malfunction may occur.
Make sure to attach your battery in the correct
direction. If you attempt to attach it in the wrong
direction forcibly, a malfunction may occur.
• Make sure not to come in contact with the other
battery terminal available for other battery packs
when charging your battery pack.
when charging your battery pack.
• Disconnect the AC Adaptor from the DC IN
jack by holding both the VCR and the DC plug.
OPEN
.
lever
POWER
switch
switch
DC IN jack
DC plug
AC Adaptor
Power cord
(Mains lead)
(Mains lead)
To the wall outlet
(wall socket)
(wall socket)
POWER/
CHARGE lamp
CHARGE lamp
Continued
,