Sony ipela rz25p Manuel D’Utilisation
GB
10
Location and Functions of Parts and Controls
3
CF card lever
Press the lever to remove the CF card
from the CF card slot.
Press the lever to remove the CF card
from the CF card slot.
4
POWER indicator (green)
When the power is supplied to the
camera, the camera starts checking the
system.
If the system is normal, this indicator
lights up.
If a system error occurs, this indicator
flashes every second. In this case,
consult your authorized Sony dealer.
When the power is supplied to the
camera, the camera starts checking the
system.
If the system is normal, this indicator
lights up.
If a system error occurs, this indicator
flashes every second. In this case,
consult your authorized Sony dealer.
5
Lens
A × 18 optical zoom, auto-focus lens is
mounted as standard equipment.
A × 18 optical zoom, auto-focus lens is
mounted as standard equipment.
6
(network) port (RJ45)
Connect to the 10BASE-T or 100BASE-
TX network using a network cable
(UTP, category 5).
TX network using a network cable
(UTP, category 5).
7
DC 12 V/AC 24 V (power input)
terminal
Connect to a 12V DC or 24V AC power
supply system.
terminal
Connect to a 12V DC or 24V AC power
supply system.
8
T
(video output) connector
(BNC type)
Outputs a composite video signal.
Connect to a composite video input
connector of a video monitor, VCR, etc.
Outputs a composite video signal.
Connect to a composite video input
connector of a video monitor, VCR, etc.
9
Reset switch
To reset the camera to the factory default
settings, supply the power to the camera,
while holding down this switch with a
pointed object.
To reset the camera to the factory default
settings, supply the power to the camera,
while holding down this switch with a
pointed object.
q; m
(microphone input) jack
(minijack, monaural)
Connect a commercially available
microphone. This jack supports plug-in-
power microphones (rated voltage: 2.4
V DC).
You can connect the microphones of the
following specifications to this camera.
Type: Electric condenser microphone
Connect a commercially available
microphone. This jack supports plug-in-
power microphones (rated voltage: 2.4
V DC).
You can connect the microphones of the
following specifications to this camera.
Type: Electric condenser microphone
Plug-in power system
Directivity: Nondirectional
Sensitivity: – 40 ± 3.5 dB
Frequency range: 50 – 15,000 Hz
Sensitivity: – 40 ± 3.5 dB
Frequency range: 50 – 15,000 Hz
qa 5
(line output) jack (minijack,
monaural)
Connect a commercially available
speaker system with the built-in
amplifier.
You can connect the speakers of the
following specifications to this camera.
Type: Active speaker
Impedance: Input impedance 4.7 kohms
Connect a commercially available
speaker system with the built-in
amplifier.
You can connect the speakers of the
following specifications to this camera.
Type: Active speaker
Impedance: Input impedance 4.7 kohms
or more
Plug: ø3.5 Mini-plug
qs
I/O (Input/Output) port
This port is provided with an RS-232C
port, two sensor inputs and two alarm
outputs.
The RS-232C port is used when you
connect peripheral devices to the camera
using the RS-232C interface, and control
the devices from the computer or
transmit/receive data from the devices
via the network.
The sensor input is used as the alarm
input. The camera operation can be
synchronized with E-mail or other
applications.
This port is provided with an RS-232C
port, two sensor inputs and two alarm
outputs.
The RS-232C port is used when you
connect peripheral devices to the camera
using the RS-232C interface, and control
the devices from the computer or
transmit/receive data from the devices
via the network.
The sensor input is used as the alarm
input. The camera operation can be
synchronized with E-mail or other
applications.
IMAGE FLIP
m
5
1
2
–
+
DC 12V
AC 24V
121110 9 8 7 6 5 4 3 2 1
6
7
8
0
9
qa
qs
Rear