Sony HTST7 Manuel D’Utilisation

12

US



The above features may not operate with certain equipment.



Depending on the settings of the connected equipment, the Control for 
HDMI function may not work correctly. Refer to the operating instructions 
of the equipment.

Using “BRAVIA” Sync features

The original Sony functions listed below can also be used with 
products that are compatible with “BRAVIA” Sync.

If a “BRAVIA” Sync-compatible TV is connected to the system, the 
power consumption is reduced in standby mode by stopping HDMI 
signal transmission when TV is turned off.



Use a High Speed HDMI cable. If you use a Standard HDMI cable, 
1080p, Deep Color, or 3D/4K images may not be displayed properly.



Use an HDMI-authorized cable. 

 

Use a Sony High Speed HDMI cable with Cable Type Logo.



We do not recommend using an HDMI-DVI conversion cable.



Check the setup of the connected equipment if an image is poor or 
the sound does not come out of the equipment connected via the 
HDMI cable.



Audio signals (sampling frequency, bit length, etc.) transmitted from 
an HDMI jack may be suppressed by the connected equipment.



Sound may be interrupted when the sampling frequency or the 
number of channels of audio output signals from the playback 
equipment is switched.



When the connected equipment is not compatible with copyright 
protection technology (HDCP), the image and/or the sound from the 
HDMI TV OUT (ARC) jack may be distorted or may not be output. In 
this case, check the specification of the connected equipment.



When “TV” is selected for the input source of the system, video 
signals via one of the HDMI IN jacks that was selected last time are 
output from the HDMI TV OUT (ARC) jack.



This system supports Deep Color, “x.v.Color,” 3D, and 4K 
transmission.



To enjoy 3D images, connect a 3D-compatible TV and video 
equipment (Blu-ray Disc player, “PlayStation

®

3,” etc.) to the system 

using High Speed HDMI cables, put on 3D glasses, and then play 
back 3D compatible Blu-ray Disc.



To enjoy 4K images, the TV and players that are connected to the 
system must be compatible with the 4K images.

Troubleshooting

If you experience any of the following difficulties while using the 
system, use this troubleshooting guide to help remedy the problem 
before requesting repairs. Should any problem persist, consult your 
nearest Sony dealer.

The system is not turned on.
 Check that the AC power cord (mains lead) is connected securely.
The system is turned off automatically.
 The “A. STBY” function is working. Set “A. STBY” to “OFF” (refer to 

“Adjusting the settings” in the Operating Instructions).

Dolby Digital or DTS multi-channel sound is not reproduced.
 Check the audio setting of Dolby Digital or DTS format on the Blu-

ray Disc player, DVD player, etc., connected to the system.