Sony klv-v26a10 Manuel D’Utilisation

KLV-V40A10

2-682-277-11(1)

 GB

“Backlight” brightens or darkens the backlight.
“Picture” increases picture contrast (the color becomes deeper), or decreases it (the color 
becomes softer).
“Brightness” brightens or darkens the picture.
“Color” increases or decreases color intensity.
“Hue” increases or decreases the green tone.

Press 

M/m to set the level, then press 

.

“Hue” can only be adjusted for an NTSC color signal (e.g., U.S.A. video tapes).

Changes the color tone of the picture.

Press 

M/m to select one of the following, then press 

.

Cool: Gives the white colors a blue tint.
Neutral: Gives the white colors a neutral tint.
Warm1/Warm2: Gives the white colors a red tint. Warm2 is redder than Warm1.

“Warm1/Warm2” only appears and can be adjusted if “Picture Mode” is set to “Custom”.

Sharpens or softens the picture.

Press 

</, to set the level, then press 

.

Reduces the picture noise (snowy picture) in a weak broadcast signal. 

Press 

M/m to select one of the following, then press 

.

Auto: Automatically reduces the picture noise.
High/Medium/Low: Modifies the effect of the noise reduction.
Off: Turns off the noise reduction feature.

This option cannot be used in Twin Picture, Picture Freeze, and Photo mode.

010COV.book  Page 34  Tuesday, May 23, 2006  9:06 AM