Sony PCLK-MN10A Manuel D’Utilisation

31

GB

Description

Adaptor for connecting external devices to a PC

Sampling frequency

44.1 kHz

USB terminal

Series B, bus power mode (conforms to USB Version 1.1)
* Connect this terminal directly to the PC with the

supplied USB cable.

DIGITAL OUT

Square optical connector jack with optical emission
wavelength of 660 nm

ANALOG OUT

Stereo mini jack with an output level of 0.63 Vrms and a
load impedance of 10 k

Ω

 or more

Maximum external dimensions

96 

×

 26 

×

 106 mm (W 

×

 H 

×

 D); (not including projecting

parts)

Weight

Approx. 140 g

The system stereo component
does not respond.

t Check that the connections have been made

properly (page 7).

t Disconnect the connecting cables and then

reconnect them.

t Try disconnecting the USB cable from the PC

connecting adaptor and from the computer,
and then connecting it again.

The displayed name of the MD or
CD does not match the disc’s
contents.

t Click the Reload button (pages 11 and 15 in

the on-line manual).

t Restart M-crew. Should the problem persist,

the data in the Disc Library may be corrupted.
Enter the names again.

The system sounds (warning
alarm/mail arrival notice) are not
heard.

t The system sounds have been specified not to

sound during M-crew startup, or the setting
may have changed to OFF when M-crew was
abnormally ended. To restore the sounds,
restart M-crew and then quit the program
normally. Or double-click the backup file
(reg0.reg to reg3.reg) in the M-crew  folder and
follow the instructions to set up the program
again.