Sony PLM-S700 Manuel D’Utilisation

31

-US

1 Warning message n Follow steps 3 through 7 in “Checking the display unit

position” (pages 23 through 25).
• After carefully reading the warnings and checking the display unit position, press

the jog dial.

2 Screen alignment n Follow steps 1 through 3 in “Checking the screen position

alignment” (pages 25 through 27).
• Read the warning carefully, and press the jog dial.
• Make sure the left and right screens are aligned, and press the jog dial.

Select PC (RGB signal) or VIDEO (video
signal) depending on the connected
equipment.

When you connect to the S-video
connector
“S VIDEO” appears on the screen.

When you connect the PC:
Adjust the screen resolution. For details, see “Signal compatibility” on page 35.
When you display VGA pictures (640 

×

 480), the picture appears about 60% of the entire

screen.

• If no picture appears, check the default setting of your PC to output the external RGB signal

from the monitor connector.

• Some PCs do not output external display signal when they turn on, or switch to external

display mode. Change the display mode of your PC, referring to the instruction manual
supplied with your PC.

When you connect the video equipment:
Start playback on the video equipment connected to the Glasstron.
When you display NTSC video picture, the picture appears about 60% of the entire
screen.

PC / RGB

VIDEO