Sony rdr-gx700 Manuel D’Utilisation
24
10
Select the setting that matches your TV
type.
“16:9”: For wide-screen TVs or standard TVs
with a wide screen mode.
“4:3 Letter Box”: For standard TVs.
Displays “wide screen” pictures with bands
on the upper and lower sections of the screen.
“4:3 Pan Scan”: For standard TVs.
Automatically displays “wide screen”
pictures on the entire screen and cuts off the
sections that do not fit.
with a wide screen mode.
“4:3 Letter Box”: For standard TVs.
Displays “wide screen” pictures with bands
on the upper and lower sections of the screen.
“4:3 Pan Scan”: For standard TVs.
Automatically displays “wide screen”
pictures on the entire screen and cuts off the
sections that do not fit.
For details, see “TV Type” on page 87.
11
Press ENTER.
The Setup Display for the component out
jacks appears.
jacks appears.
12
Select an option.
Select “On” if you are using the
COMPONENT VIDEO OUT jacks.
Otherwise, select “Off.”
COMPONENT VIDEO OUT jacks.
Otherwise, select “Off.”
13
Press ENTER.
The Setup Display for the LINE 3/DECODER
jack appears.
jack appears.
14
Select an option.
Select “Yes” if you will connect a decoder to
the LINE 3/DECODER jack. Otherwise,
select “No.”
the LINE 3/DECODER jack. Otherwise,
select “No.”
15
Press ENTER.
The Setup Display for selecting the type of
video signal output from the LINE 1-TV jack
appears.
video signal output from the LINE 1-TV jack
appears.
16
Select the type of signal you want to output
from the LINE1-TV jack.
“Video”: Outputs video signals.
“S Video”: Outputs S video signals.
“RGB”: Outputs RGB signals.
Note that if you select “On” in step 12, you
cannot select “RGB,” and that if you select
“Yes” in step 14, you cannot select “S Video.”
• If you select “S Video” or “RGB,”
“S Video”: Outputs S video signals.
“RGB”: Outputs RGB signals.
Note that if you select “On” in step 12, you
cannot select “RGB,” and that if you select
“Yes” in step 14, you cannot select “S Video.”
• If you select “S Video” or “RGB,”
SMARTLINK will be deactivated.
17
Press ENTER.
The Setup Display for selecting the type of
jack used to connect to your amplifier
(receiver) appears.
jack used to connect to your amplifier
(receiver) appears.
18
Select the type of jack (if any) you are
using to connect to an amplifier (receiver),
and press ENTER.
and press ENTER.
If you did not connect an AV amplifier
(receiver), select “No,” then go to step 22.
If you connected an AV amplifier (receiver)
using just an audio cord, select “Yes: LINE 2
OUT (R-AUDIO-L),” then go to step 22.
If you connected an AV amplifier (receiver)
using either a digital optical or coaxial cord,
select “Yes: DIGITAL OUT.”
(receiver), select “No,” then go to step 22.
If you connected an AV amplifier (receiver)
using just an audio cord, select “Yes: LINE 2
OUT (R-AUDIO-L),” then go to step 22.
If you connected an AV amplifier (receiver)
using either a digital optical or coaxial cord,
select “Yes: DIGITAL OUT.”
19
Select the type of Dolby Digital signal you
wish to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
EASY SETUP
TV Type
5/9
Select your TV screen type.
16 : 9
4 : 3 Letter Box
4 : 3 Pan Scan
EASY SETUP
Line1 Output
8/9
Select the Line1 output signal.
Video
S Video
RGB
EASY SETUP
Audio Connection
9/9
Is this recorder connected to an amplifier (receiver)?
Select the type of jack you are using.
Select the type of jack you are using.
Yes :
LINE2 OUT(R-AUDIO-L)
Yes :
DIGITAL OUT
No
Audio Connection
9/9
Dolby Digital
D-PCM
Dolby Digital
EASY SETUP