Sony rdr-hx1010 Manuel D’Utilisation

Page de 116
44
To stop recording during timer recording
Open the remote’s cover and press 
x REC STOP. 
Note that it may take a few seconds for the 
recorder to stop recording.
About the PDC/VPS function
PDC/VPS signals are transmitted with TV 
programmes in some broadcast systems. These 
signals ensure that timer recordings are made 
regardless of any broadcast delays, early starts, or 
broadcast interruptions.
To use the PDC/VPS function
Set “PDC/VPS” to “On” in step 2 above.
When you turn on this function, the recorder starts 
scanning the channel before the timer recording 
starts. If you are watching TV when scanning 
starts, a message will appear on the TV screen. If 
you want to watch TV, switch to your TV’s tuner 
or turn off the PDC/VPS channel scan function.
Note that if you turn off the PDC/VPS channel 
scan function, the timer recording will not start.
To turn off the PDC/VPS channel scan
Press TOOLS and select “PDC/VPS Scan Off.”
To ensure that the PDC/VPS function works 
properly, turn off the recorder before the timer 
recording starts. This will automatically turn on 
the PDC/VPS channel scan function while the 
recorder remains off.
Rec Mode Adjust
If there is not enough available disc space for the 
recording, the recorder automatically adjusts the 
recording mode to enable the entire programme to 
be recorded. This function is normally set to “On.”
To cancel this function, press TOOLS while the 
Timer List is displayed. Select “Rec Mode 
Adjust” and press ENTER. Select “Off” and press 
ENTER.
If the timer settings overlap
Overlapped timer settings are shown as follows.
To store the setting as shown, select “OK.” The 
programme that starts first has priority and the 
second programme starts recording only after the 
first programme has finished. 
To cancel the overlapped setting, select “Cancel.” 
To confirm, change, or cancel timer recording 
To extend the recording duration time while 
recording
1
Press TOOLS during recording to select 
“Extend Rec,” and press ENTER.
2
Press 
M/m to select the duration time.
You can set the duration in increments of 10 
minutes, for a maximum of 60 minutes.
3
Select “OK” and press ENTER.
One Touch Timer
If you use the SMARTLINK connection, you can 
easily display the timer programming menu.
When the TV is turned on or in standby mode, 
press 
[TIMER]. The recorder automatically turns 
on and the TV’s input is switched to the recorder. 
The Timer programming menu appears.
Timer
These timer settings overlap.
Wed
21:00-22:00 AAB DVD SP
PDC/VPS
Wed
29.10
29.10 20:30-22:00 DEF DVD SP
PDC/VPS
OK
Cancel
Do you want to continue?
Extend Rec. Time
Set the timer extend function.
Wed
OK
Cancel
Extend Time
Off
DVD  SP
28.9 10:00-11:30 AAB