Sony rdr-hx1010 Manuel D’Utilisation
91
Se
tti
tti
n
gs
a
a
nd
Adj
us
tm
Adj
us
tm
en
ts
ts
1
Select “Audio Connection” in “Audio,” and
press ENTER.
press ENTER.
2
Select “Digital Out,” and press ENTER.
3
Select “On,” and press ENTER.
4
Set the digital output signal.
• Dolby Digital (HDD/DVDs only)
Selects the type of Dolby Digital signal.
Selects the type of Dolby Digital signal.
b
Note
If the HDMI OUT jack is connected to equipment not
compatible with DOLBY DIGITAL signals, the
“D-PCM” signals will be automatically output even
when you select “Dolby Digital.”
compatible with DOLBY DIGITAL signals, the
“D-PCM” signals will be automatically output even
when you select “Dolby Digital.”
• MPEG (DVD VIDEO only)
Selects the type of MPEG audio signal.
Selects the type of MPEG audio signal.
b
Note
If the HDMI OUT jack is connected to equipment not
compatible with MPEG audio signals, the “PCM” signals
will be automatically output even when you select
“MPEG.”
compatible with MPEG audio signals, the “PCM” signals
will be automatically output even when you select
“MPEG.”
• DTS (DVD VIDEO only)
Selects whether or not to output DTS signals.
Selects whether or not to output DTS signals.
b
Note
When HDMI output is performed to equipment not
compatible with DTS signals, the signals will not be
output regardless of the “DTS” setting.
compatible with DTS signals, the signals will not be
output regardless of the “DTS” setting.
• 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio signal.
Selects the sampling frequency of the audio signal.
b
Notes
• “48kHz/96kHz PCM” setting has no effect when audio
signals are output from the LINE 2 OUT (R-AUDIO-
L) jacks. If the sampling frequency is 96kHz, signals
are simply converted to 96kHz analog signals and
output.
L) jacks. If the sampling frequency is 96kHz, signals
are simply converted to 96kHz analog signals and
output.
• When you use the DIGITAL OUT (COAXIAL or
OPTICAL) jack to listen to MPEG audio signals and
set “MPEG” to “MPEG” in “Audio” setup, no sound
will come from your speakers if you select one of the
TVS modes.
set “MPEG” to “MPEG” in “Audio” setup, no sound
will come from your speakers if you select one of the
TVS modes.
• If the HDMI OUT jack is connected to equipment not
compatible with 96 kHz signals, 48 kHz PCM will be
automatically output even when you select “96kHz/
24bit.”
automatically output even when you select “96kHz/
24bit.”
On
Normally select this position.
Off
The influence of the digital
circuit upon the analogue
circuit is minimal.
circuit upon the analogue
circuit is minimal.
D-PCM
Select this when the recorder is
connected to an audio component
lacking a built-in Dolby Digital
decoder. The surround effects of
output signals are determined by
the “Downmix” setting item in
“Audio” setup.
connected to an audio component
lacking a built-in Dolby Digital
decoder. The surround effects of
output signals are determined by
the “Downmix” setting item in
“Audio” setup.
Dolby
Digital
Digital
Select this when the recorder is
connected to an audio component
with a built-in Dolby Digital
decoder.
connected to an audio component
with a built-in Dolby Digital
decoder.
PCM
Select this when the recorder is
connected to an audio component
without a built-in MPEG decoder.
If you play MPEG audio sound
tracks, the recorder outputs stereo
signals via the DIGITAL OUT
(COAXIAL or OPTICAL) jack.
connected to an audio component
without a built-in MPEG decoder.
If you play MPEG audio sound
tracks, the recorder outputs stereo
signals via the DIGITAL OUT
(COAXIAL or OPTICAL) jack.
MPEG
Select this when the recorder is
connected to an audio component
with a built-in MPEG decoder.
connected to an audio component
with a built-in MPEG decoder.
Audio - Audio Connection
Digital Out :
On
MPEG :
Dolby Digital :
PCM
D-PCM
DTS :
Off
48kHz/96kHz PCM :
48kHz/16bit
Audio(HDMI) :
Auto
On
Select this when the recorder is
connected to an audio component
with a built-in DTS decoder.
connected to an audio component
with a built-in DTS decoder.
Off
Select this when the recorder is
connected to an audio component
without a built-in DTS decoder.
connected to an audio component
without a built-in DTS decoder.
48kHz/
16bit
16bit
The DVD video audio signal is
converted to 48kHz/16bit and
output.
converted to 48kHz/16bit and
output.
96kHz/
24bit
24bit
All signals containing 96kHz/24bit
are output without conversion.
However, the signals are output at
48kHz/16bit if copyright-
protected signals are contained.
are output without conversion.
However, the signals are output at
48kHz/16bit if copyright-
protected signals are contained.
,continued