Sony rdr-hx510 Manuel D’Utilisation
87
Se
tti
tti
n
g
s an
d Adj
d Adj
u
st
m
ent
s
s
Disc and Remote Control
Settings/Factory Settings
(Options)
Settings/Factory Settings
(Options)
The “Options” setup allows you to set up other
operational settings.
operational settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
in stop mode.
2
Select “SETUP,” and press ENTER.
3
Select “Options,” and press ENTER.
The “Options” setup appears with the
following options. The default settings are
underlined.
following options. The default settings are
underlined.
Format DVD-RW (DVD-RW only)
The recorder automatically starts formatting in
VR mode or Video mode, whichever is selected
below, when a new, unformatted DVD-RW is
inserted.
VR mode or Video mode, whichever is selected
below, when a new, unformatted DVD-RW is
inserted.
HDD Bilingual Rec. (HDD only)
Selects the sound to be recorded on the HDD.
b
Note
If you set the recording mode to be changed while
dubbing from a DVD to the HDD, the sound recorded in
the source (DVD) is applied regardless of this setting.
dubbing from a DVD to the HDD, the sound recorded in
the source (DVD) is applied regardless of this setting.
DVD Bilingual Rec. (for all recordable discs
except DVD-RW in VR mode)
except DVD-RW in VR mode)
Selects the sound to be recorded on the recordable
disc. This setting is not necessary when recording
on DVD-RWs (VR mode) that record both the
main and sub sounds.
disc. This setting is not necessary when recording
on DVD-RWs (VR mode) that record both the
main and sub sounds.
Dimmer
Adjusts the lighting of the front panel display.
b
Note
When “Power Save” in “Options” setup is set to “On,”
the front panel display is turned off during standby
regardless of this setting.
the front panel display is turned off during standby
regardless of this setting.
Power Save
Selects whether this recorder is in power save
mode when the power is turned off (standby).
mode when the power is turned off (standby).
b
Notes
• Power Save mode does not function in the following
cases, even when “Power Save” is set to “On”.
– Synchro Recording is set.
– there is a timer setting with “PDC/VPS” set to “On”
– Synchro Recording is set.
– there is a timer setting with “PDC/VPS” set to “On”
in the Timer List.
• The SMARTLINK features are not available when
“Power Save” is set to “On
.
”
VR
Automatically formats the disc in
VR mode.
VR mode.
Video
Automatically formats the disc in
Video mode.
Video mode.
Main
Records the main sound for the
bilingual programme.
bilingual programme.
Sub
Records the sub sound for the
bilingual programme.
bilingual programme.
Main+Sub
Records the main and sub sounds
for the bilingual programme.
for the bilingual programme.
SETUP
Format DVD-RW :
VR
Settings
Options
Features
Audio
Video
Easy Setup
Command Mode :
Factory Setup
Auto Display :
Power Save :
Dimmer :
DVD Bilingual Rec. :
HDD Bilingual Rec. :
DVD3
On
Off
Normal
Main
Main
Main
Records the main sound for the
bilingual programme.
bilingual programme.
Sub
Records the sub sound for the
bilingual programme.
bilingual programme.
Normal
Bright lighting.
Power
Save
Save
Low lighting. Turns off the
lighting when the power is off.
lighting when the power is off.
On
Sets to power save mode. The
front panel display is off when the
recorder is in standby.
front panel display is off when the
recorder is in standby.
Off
Does not set to power save mode.
Normally, select this.
Normally, select this.
,continued