Sony rdr-vx420 Manuel D’Utilisation

Selects whether or not to output video signals 
from the COMPONENT VIDEO OUT jacks.

• When you set “Line 1 Output” to “RGB,” you cannot 

set “Component Out” to “On.”

• When you connect the recorder to a monitor or 

projector via only the COMPONENT VIDEO OUT 
jacks, do not select “Off,” as the picture will not appear.

If your TV accepts progressive (525p/625p) 
format signals, you will enjoy accurate colour 
reproduction and high quality image.

Select “Progressive,” and press ENTER.

Select “On,” and press ENTER.

Follow the instructions appearing on the TV 
screen.
1) Ensure your TV is progressive scan 

capable.

2) Connect with component video output 

jacks (red/green/blue connections). 
See “If your TV has component video input 
jacks” on page 16.

3) Select [OK] to test your video signal.
4) If video signal appears OK, video 

connection is complete.

Select “OK” and press ENTER.
The PROGRESSIVE indicator on the 
recorder lights up.
If picture is distorted, press O RETURN.
Check the connection (page 16).

z

To cancel the “Progressive” setting, select “Off” in step 
2 above. Or, press DVD to operate the DVD recorder, 
and then hold down X PAUSE on the recorder for five 
seconds or more.

If you select progressive signals when you connect the 
recorder to a TV that cannot accept the signal in 
progressive format, the image quality will deteriorate. In 
this case, set “Progressive” to “Off.”

On

Outputs the component video 
signals. Select this when you want 
to view progressive signals.

Off

Outputs no signals.

TV Type

Black Level

Picture Control

Progressive

:  Standard

:  Off

:  4:3 Pan Scan

:  On

Setup

Disc Setting

Edit

Title List

Timer

Dubbing

OK

Cancel

Progressive Scan Output

1)  Ensure your TV is progressive scan capable.

2)  Connect with component video output jacks.

 

 (red/green/blue connections)

3)  Select [OK] to test your video signal.

4)  If video signal appears OK, 

 

video connection is complete.