Sony SDM-HS95P Manuel D’Utilisation
13
GB
x Adjust the picture’s sharpness manually
(Phase/Pitch)
You can adjust the picture’s sharpness as follows. This
adjustment is effective when the computer is connected to the
monitor’s HD15 input connector (analog RGB).
adjustment is effective when the computer is connected to the
monitor’s HD15 input connector (analog RGB).
1
Set the resolution to 1280
× 1024 on the computer.
2
Load the CD-ROM.
3
Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility]
display the test pattern.
For Windows
Click [Utility]
t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility]
Click [Utility]
t [Mac]/[Mac Utility].
4
Press the MENU button.
The main menu appears on the screen.
The main menu appears on the screen.
5
Press the
m/M buttons to select
(SCREEN) and
press the OK button.
The SCREEN menu appears on the screen.
The SCREEN menu appears on the screen.
6
Press the
m/M buttons to select “PHASE” and press
the OK button.
The “PHASE” adjustment menu appears on the screen.
The “PHASE” adjustment menu appears on the screen.
7
Press the
m/M buttons until the horizontal stripes
are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8
Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.
9
Press the
m/M buttons to select “PITCH” and press
the OK button.
The “PITCH” adjustment menu appears on the screen.
The “PITCH” adjustment menu appears on the screen.
10 Press the
m/M buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
Adjust so that the vertical stripes disappear.
11 Click [END] on the screen to turn off the test pattern.
x Adjust the picture’s position manually
(H CENTER /V CENTER)
If the picture is not in the center of the screen, adjust the picture’s
centering as follows.
centering as follows.
1
Set the resolution to 1280
× 1024 on the computer.
2
Load the CD-ROM.
3
Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility]
display the test pattern.
For Windows
Click [Utility]
t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility]
Click [Utility]
t [Mac]/[Mac Utility].
4
Press the MENU button.
The main menu appears on the screen.
The main menu appears on the screen.
5
Press the
m/M buttons to select
(SCREEN) and
press the OK button.
The SCREEN menu appears on the screen.
The SCREEN menu appears on the screen.
6
Press the
m/M buttons to select “H CENTER” or “V
CENTER” and press the OK button.
The “H CENTER” adjustment menu or “V CENTER”
adjustment menu appears on the screen.
The “H CENTER” adjustment menu or “V CENTER”
adjustment menu appears on the screen.
7
Press the
m/M buttons to center the test pattern on
the screen.
8
Click [END] on the screen to turn off the test pattern.
MENU POSITION menu
You can change the menu position if it is blocking an image on
the screen.
the screen.
1
Press the MENU button.
The main menu appears on the screen.
The main menu appears on the screen.
2
Press the
m/M buttons to select
(MENU
POSITION) and press the OK button.
The “MENU POSITION” menu appears on the screen.
The “MENU POSITION” menu appears on the screen.
3
Press the
m/M buttons to select the desired position
and press the OK button.
You can choose one of 9 positions where the menu will
appear.
You can choose one of 9 positions where the menu will
appear.
E X I T
1 2 8 0
1 0 2 4
6 0 H z
x
/
M E N U P O S T O N
I
I