Sony SDM-M51 Manuel D’Utilisation
20
Displaying this monitor’s name, serial number,
and date of manufacture.
and date of manufacture.
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds.
hold the MENU button for more than 5 seconds.
The monitor’s information box appears.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-M51
• Serial number
• Name and specifications of your computer and graphics board.
the following information:
• Model name: SDM-M51
• Serial number
• Name and specifications of your computer and graphics board.
Picture is fuzzy
• Adjust the brightness and contrast (page 12).
• Adjust the pitch and phase (page 13).
• Adjust the pitch and phase (page 13).
x
Problems caused by the connected computer or other equipment
• Set the resolution to XGA (1024 x 768) on your computer.
Picture is ghosting
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
• Check that all plugs are firmly seated in their sockets.
Picture is not centered or sized
properly
properly
• Adjust the pitch and phase (page 13).
• Adjust the picture position (page 13). Note that some video modes do not fill the screen to
• Adjust the picture position (page 13). Note that some video modes do not fill the screen to
the edges.
The picture is dark
• Adjust the brightness (page 12).
• Adjust the backlight (page 12).
• It takes a few minutes for the display to become bright after turning on the monitor.
• Adjust the backlight (page 12).
• It takes a few minutes for the display to become bright after turning on the monitor.
Wavy or elliptical pattern (moire)
is visible
is visible
• Adjust the pitch and phase (page 13).
Color is not uniform
• Adjust the pitch and phase (page 13).
White does not look white
• Adjust the color temperature (page 14).
Monitor buttons do not operate
(
(
appears on the screen)
• If the menu lock is set to ON, set it to OFF (page 16).
The monitor turns off after a while
• Set the power saving function to OFF (page 15).
x
Problems caused by the connected computer or other equipment
• Set the computer’s power saving setting to off.
Symptom
Check these items
INFORMATION
MODEL : SDM-M51
SER NO : 1234567
MANUFACTURED : 2000-52
SER NO : 1234567
MANUFACTURED : 2000-52
MENU
Example
Model name
Serial number
Week and year
of manufacture
of manufacture