Sony STR-DA7100ES Manuel D’Utilisation
86
GB
The following operations are described for
connecting an IR repeater and operating the
receiver in 2nd zone or 3rd zone. When an IR
repeater is not connected, use this receiver in
the main room.
connecting an IR repeater and operating the
receiver in 2nd zone or 3rd zone. When an IR
repeater is not connected, use this receiver in
the main room.
1
On the remote, press 2ND
ZONE or 3RD ZONE.
ZONE or 3RD ZONE.
The remote switches to the 2nd zone or
3rd zone mode.
3rd zone mode.
2
Turn on the main receiver (this
receiver).
receiver).
3
Turn on the amplifier in the 2nd
or 3rd zone.
or 3rd zone.
4
Press one of the input buttons
on the remote to select the
source signals you want to
output.
on the remote to select the
source signals you want to
output.
For the 2nd zone, analog video and audio
signals are output. For the 3rd zone, only
analog audio signals are output. When
you select “SOURCE,” the signals of the
current input are output. Refer to page 82
for details.
signals are output. For the 3rd zone, only
analog audio signals are output. When
you select “SOURCE,” the signals of the
current input are output. Refer to page 82
for details.
5
Adjust to a suitable volume.
• In the case of illustration 1-1 or 2 (page
• In the case of illustration 1-2 (page
85), you can only adjust the surround
back speaker volume in 2ND ZONE.
back speaker volume in 2ND ZONE.
1
Set to “2ND ZONE” on the SURR
BACK SP setting (page 49).
BACK SP setting (page 49).
2
Adjust the volume using MASTER
VOL+/– on the remote.
VOL+/– on the remote.
The initial setting of the volume is –
∞ dB
(no sound output).
Example of controlling an amplifier
in the 2nd room
in the 2nd room
Tips
• Even when this receiver is turned off, the receiver
in the 2nd zone or 3rd zone remains turned on. To
turn off all receivers, press ?/1 and AV ?/1 on the
RM-AAE003 remote at the same time (SYSTEM
STANDBY).
turn off all receivers, press ?/1 and AV ?/1 on the
RM-AAE003 remote at the same time (SYSTEM
STANDBY).
• Only signals from components connected to the
analog input jacks are output through the 2ND
ZONE OUT or 3RD ZONE OUT jacks. No signals
are output from components connected to only the
digital input jacks.
ZONE OUT or 3RD ZONE OUT jacks. No signals
are output from components connected to only the
digital input jacks.
• When “SOURCE” is selected, the signals input to
the MULTI CH IN jacks are not output from the
2ND ZONE OUT or 3RD ZONE OUT jacks even
when MULTI CH IN is selected. The analog audio
signals of the current function are output.
2ND ZONE OUT or 3RD ZONE OUT jacks even
when MULTI CH IN is selected. The analog audio
signals of the current function are output.
To operate with RM-AAE003
1
Press RM SET UP.
The set up list appears.
2
Select “COMMAND MODE” by
moving and pressing the easy
scroll key.
moving and pressing the easy
scroll key.
3
Select “2ND ZONE” (or “3RD
ZONE”) by moving and
pressing the easy scroll key.
ZONE”) by moving and
pressing the easy scroll key.
To
Do the
following
following
Turn the power on or off
Press ?/1.
Listen to the sound of the
CD player connected to the
CD input jacks
CD player connected to the
CD input jacks
Press SA-CD/
CD, then press
H.
CD, then press
H.
Adjust the volume
Press MASTER
VOL +/–.
VOL +/–.