Sony STR-DE375 Manuel D’Utilisation

7

You can play decoded Dolby Digital soundtracks through the
speakers connected to the receiver
If you have a DVD player or a Dolby Digital decoder
with 5.1 CH output, you can amplify a decoded Dolby
Digital soundtrack with the following connections.

If you have a DVD player with 2 CH analog output, connect
it to another function jack.

This section describes how to connect your speakers to
the receiver. Although front (left and right) speakers
are required, center and surround speakers are
optional. Adding center and surround speakers will
enhance the surround effects. Connecting an active
woofer will increase bass response. For specific
locations of the terminals, see the illustration below.

For optimum surround sound effect, place your
speakers as shown below.

Speaker cord (not supplied) (1 for each speaker)

Twist the stripped ends of the cord about 2/3 inch (15 mm).
Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack bass.

DVD/MULTI CH

FRONT SURROUND

CENTER

SUB

WOOFER

L

R

FRONT

SURROUND

CENTER

SUB

WOOFER

PRE OUT

°

(continued)

SPEAKERS

SURROUND

L

R

CENTER

SPEAKERS

FRONT

R

L