Sony UP-DF500 Manuel D’Utilisation

O

per

at

ion

Loading Film

13

roller, pinch roller, and separation rubbers” (on 
page 21).

• Do not add film halfway through one bag of film. 

The reason for this is because the unit counts the 
remaining film using the IC tag on the printing 
protection sheet on the bottom.

Remove the seal from the film placed in the film 
tray.
1

Remove the sticky part of the seal, pulling the 
blank part of the seal toward you.

2

Close the film tray cover after you pull the 
blank portion of the seal out of the film tray.

Be sure to check that the hooks of the film tray 
cover and its magnets are attached firmly on the 
film tray. If the film tray cover is not closed 
correctly, film placed in the film tray may slide 
around.

3

Remove the seal from the film completely, by 
pulling the blank portion out of the film tray.

Insert the film tray.

After a few seconds, the film tray is locked and the 
following message appears on the LCD.

• If you remove the film and plan to keep them for a long 

time, store unused film in the damp-proof bag.

• Store the unopened package in a cool, dark place.

Check that the hooks of the film tray cover are 
locked and its magnets are attached firmly on 
the film tray.