Sony UP-DR80MD Manuel D’Utilisation

15

Before Printing

  O
p

er

at

io

n

2

Place the paper roll in the media tray so that the 
arrow on the label points toward the ink ribbon 
side. You can load the paper roll in the correct 
direction by matching the colors of the paper 
holders inserted into the paper roll with the colors 
on the media tray. 

 

3

Close the media tray cover so that it clicks into 
place.

 

Once the paper roll has been loaded, do not touch the 
printing surface (the inner surface of the paper roll). 
Fingerprints or sweat on the surface of the paper, or 
even creases in the paper, could result in poor printing 
quality.

Carefully peel off the adhesive labels from the paper 
roll in the direction indicated by the arrow.

 

Be certain to remove the labels completely. If the 
labels are not peeled off carefully, they can leave 
adhesive on the paper. Leaving any of the label in the 
printer can cause a malfunction.

Insert the media tray into the printer.
Push the media tray in until it clicks into place.

 

• Dropping the media tray while it is loaded with 

paper and ink ribbon could cause personal injury. 
Always use two hands when carrying the media 
tray, supporting the media tray from the bottom.

• Make sure that the leading edge of the paper does 

not extend to the ink ribbon. If the leading edge of 
the paper touches the ink ribbon, it can cause a 
malfunction. 

Pink

Blue