Sony XA-CC1 Manuel D’Utilisation

3-257-674-21 (1)

Operating Instructions



 2004 Sony Corporation   

Printed in Japan

The XA-CC1 is a connection adapter for connecting a car cradle to a Sony master unit having the CD/
MD changer control function.

Sony car audio units being compatible with PEGA-CC5 include:
— Units with CD/MD changer control from 2004 forward
— Following units

Power requirement

12 V DC negative earth

Dimensions

Approx. 97.2 

×

 55.7 

×

 23.7 mm (3 

7

/

8

 

×

 2 

1

/

4

 

×

 

15

/

16

 in.) (w/h/d)

(not including connection cable)

Mass

Approx. 260 g (10 oz)
(including connection cable)

Input

Car cradle I/O input (8pin)

Output

SONY-BUS control output (8pins)
SONY-BUS audio output (RCA-pin)
ATT control output

Design and specifications are subject to change without notice.

•Choose the installation location carefully so that the unit does not interfere with normal driving

operations.

•Avoid installing the unit where it would be subject to :

— high temperatures, such as from direct sunlight or hot air from the heater.
— draft, rain or moisture.
— dust or dirt.
— magnetic fields.

•Install the unit in a location that does not obstruct the operation of passenger-side airbag.

You are recommended to install the unit inside the car panel or glove box.
Please consult a qualified technician or service personnel if you cannot attach the connection adapter
to the car securely.

If you have any questions or problems concerning your unit that are
not covered in this manual, please consult your nearest Sony dealer.