Denon instruction of special mode for poa-3012ci Instruction De Maintenance
2008/9/25
V01
Instruction of Special mode
While pushing A and B buttons simultaneously, insert AC cable of the unit to AC strip.
Button A
Button B
Special Mode
Contents
ZONE6
MENU
Version of all firmware
Indication of Serial No, Main Version, Version of
DM850, and Mac Address.
DM850, and Mac Address.
ZONE6
DISPLAY All lighting mode of FL Display
Confirmation of all lighting of FL tube.
ZONE6
△
Update mode for recovery
(for server of production)
(for server of production)
When compulsorily rewriting the firmware via DPMS
when rewriting ROM of the Main micro computer fails on
the way. (via DPMS server for production.)
when rewriting ROM of the Main micro computer fails on
the way. (via DPMS server for production.)
ZONE6
▽
Server mode for development
When you update the firmware of unit via DPMS by
using the server for development.
using the server for development.
ZONE5
MENU
Check mode for EEPROM
Confirmation whether properly operation of EEPROM.
ZONE5
DISPLAY Initialization mode (except
Installer)
Initialization of backup data except data for Installer
Setup
Setup
ZONE5
△
Update mode for recovery
(for development)
(for development)
When rewriting ROM of the Main microcomputer fails on
the way, the mode that can be compulsorily rewritten
with DENON WRITER is turned on.
the way, the mode that can be compulsorily rewritten
with DENON WRITER is turned on.
ZONE5
▽
Dummy server mode
When you UPDATE the firmware of unit via DPMS by
using the dummy server.
using the dummy server.
ZONE4
MENU
Installer mode
The item of Installer Setup is displayed on the Web
screen when turning it on to the turning on mode and
this mode of Installer Setup.
screen when turning it on to the turning on mode and
this mode of Installer Setup.
ZONE4
DISPLAY Product mode
Confirmation of writing of Mac Address in factory.
ZONE4
△
Recovery UPDATE mode
(for development)
(for development)
Firmware is rewritten by compulsorily using DPMS when
rewriting ROM of the Main microcomputer fails on the
way.
rewriting ROM of the Main microcomputer fails on the
way.
ZONE3
DISPLAY initialization mode for Server
ALL initialization.
ZONE3
MENU
initialization mode for Installer
Initialization only of data for Installer Setup.
While pushing A and B buttons simultaneously, insert AC cable of the unit to AC strip, or
While pushing A and B buttons simultaneously, turn on the power of unit.
ZONE4
▽
Panel Lock mode
The buttons on the front panel is not accepted. When
the customer push the buttons of front pane, FLD
indicates "PANEL LOCKED". While pushing "ZONE4"
button and "*" button simultaneously, turn on the power
of unit again. Panel lock mode will be released.
the customer push the buttons of front pane, FLD
indicates "PANEL LOCKED". While pushing "ZONE4"
button and "*" button simultaneously, turn on the power
of unit again. Panel lock mode will be released.