Cisco Aironet 1242AG AIR-AP1242AG-K-K9 Fiche De Données
Codes de produits
AIR-AP1242AG-K-K9
Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 7 of 8
Item
Specification
●
802.11i, WPA2, WPA
●
802.1X
●
AES, TKIP
Other:
●
IEEE 802.11g and IEEE 802.11a
●
FCC Bulletin OET-65C
●
RSS-102
●
EN 50155 and EN 50121-3-2 (Railway)
Antenna Connectors
2.4 GHz
●
Dual RP-TNC connectors
5 GHz
●
Dual RP-TNC connectors
Status LEDs
●
Status LED indicates operating state, association status, error/warning condition, boot sequence, and maintenance
status.
●
Ethernet LED indicates status of activity over the Ethernet.
●
Radio LED indicates status of activity over the radio.
Dimensions
(W x L x H)
(W x L x H)
●
6.6 x 8.5 x 1.1 in. (16.76 x 21.59 x 2.79 cm)
Weight
●
2.0 lbs
Environmental
●
Non-operating (storage) temperature: –40 to 185°F (– 40 to 85°C)
●
Operating temperature: –4 to 131°F (–20 to 55°C)
●
Operating humidity: 10 to 90 percent (non-condensing)
System Memory
●
32 MB RAM
●
16 MB flash
Input Power
Requirements
Requirements
●
100 to 240 VAC; 50 to 60Hz (power supply)
●
36 to 57 VDC (device)
Powering Options
●
Local power
●
802.3 AF switches
●
Cisco higher-power switches capable of supporting 13W or greater
●
Cisco Aironet power injectors (PWRINJ3 and PWRINJ-FIB)
●
Third-party PoE devices (must meet input power and power draw requirements)
Power Draw
12.95W maximum
Note: 12.95W is the maximum power required at the powered device. If the access point is being used in a PoE
configuration, the power drawn from the power sourcing equipment will be higher by some amount dependent on the
length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power
draw (access point and cabling) to 15.4W.
configuration, the power drawn from the power sourcing equipment will be higher by some amount dependent on the
length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power
draw (access point and cabling) to 15.4W.
Warranty
One year
Wi-Fi Certification
System Requirements
Table 3 lists the system requirements for Cisco Aironet 1240AG Series Access Points.
Table 3.
System Requirements for Cisco Aironet 1240AG Series Access Points
Access Method
Description
Browser
Using the Web browser management GUI requires a computer running Internet Explorer Version 6.0 or later, or Netscape
Navigator Version 7.0 or later.
Navigator Version 7.0 or later.
PoE
Power sourcing equipment compliant with Cisco inline power or IEEE 802.3af, and providing at least 12.94W at 48 VDC
Ordering Information
To place an order, visit the Cisco Ordering Website at:
http://www.cisco.com/en/US/ordering/index.shtml