Nokia 7250, 7250i Instruction De Maintenance
NHL-4J/NHL-4JX
Company confidential
CCS Technical Documentation
Page 4
Copyright Nokia. All rights reserved.
Issue 2 06/03
Phoenix Service SW
Before Installation
•
Check that a Dongle is attached to the parallel port of your computer.
•
Download the installation package (e.g.
phoenix_service_sw_a3_03_83_005.exe
) to your computer (e.g. C:\TEMP)
•
Close all other programs
•
Run the application file (e.g.
phoenix_service_sw_a3_03_83_005.exe
) and
follow instructions on the screen
•
Administrator rights may be required to be able to install Phoenix depending
on the Operating System
on the Operating System
•
If the dongle driver is installed or updated, you need to reboot your PC before
the installation can continue.
the installation can continue.
•
If uninstalling or rebooting is needed at any point, you will be prompted by the
Install Shield program.
Install Shield program.
If at any point during installation you get this message, Dongle is not found and installa-
tion can´t continue.
tion can´t continue.
Possible reasons may be defective or too old PKD-1Dongle (five digit serial number Don-
gle when used with FPS-8 Prommer) or that the FLS-4S POS Flash Dongle is defective or
power to it is not supplied by external charger.
gle when used with FPS-8 Prommer) or that the FLS-4S POS Flash Dongle is defective or
power to it is not supplied by external charger.
Check the COM /parallel ports used first! After correcting the problem Installation can be
restarted.
restarted.