Panasonic cf-27exxxxxx Manuel D’Utilisation

Page de 48
15
CAUTION
 HDD motor timeout: When the hard disk drive is not accessed for more than a
minute, the hard disk motor is turned off.
(except when the power management is set to disable)
 ECO mode timeout:
If there is no input from a key, the touch pad, the touchscreen
or an external  mouse for more than two minutes, the LCD
and the hard disk drive will be powered off.  Even when an
application software is being installed, the computer may en-
ter the ECO mode.
(except when the power management is set to disable )
 Power Management settings
When installed in a network environment.
Be sure to disable the suspend/hibernation timeout settings with the Setup Utility.
After resuming operation from the suspend or hibernation mode, the network con-
nection may be severed or the computer will not work properly.
When a device like a high-speed modem or ISDN terminal adapter is connected
to the serial port, etc.
There are times when high-speed communication is adversely affected if the power
management function is enabled.  Please confirm that 
 is displayed by press-
ing                F8    to disable the power management function.  After you have
finished using a communications device, you can enable the power management
function by pressing
Key operation and music playback.
When the power management function is running, you may feel that keyboard,
touch pad, or touchscreen (or mouse) operations are sluggish.  Furthermore,
music may not be played back correctly when entering the ECO mode during
playback.
Fn   +   F8   .
Fn   +
Computing On The Road
*
Enabled only when the battery itself is being used.
**
 is displayed by pressing    Fn    +    F8    to disable the power management function.
The    Fn    +    F8    key combination may not function during certain operation, such as
during HDD access.  Operability can be checked by confirming that 
 or  
 is being
displayed ).
1 min
1 min
Never
2 min
2 min
Never
Enable
Disable
Disable
HDD motor timeout
ECO mode timeout
Power Conservation
(AC Adapter Connected)
Popup window display by
pressing   Fn   +   F8
Enable (Always) Enable(Battery)*
Disable
Power Management
Functions
automatically set
**
(Setting at the time of
purchase)
When the power management setting is disabled in the Setup Utility,   Fn    +    F8
does not work.
NOTE