Panasonic cf-p1s3xxxx Manuel D’Utilisation

12

After the cover is closed, press down firmly on the cover and con-
firm that the cover is locked.

Do not twist or pull the AC power cord forcefully.  Doing so may damage the
connections.
Use only the specified AC adaptor with your computer.  Using an AC adaptor other
than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord from
your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder and
lightning storms.  Since this could adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless the battery pack is installed.

Turn your computer on
(1) Push the reset switch using the stylus.

(2) At the confirmation message, press   Y   .

The Windows* calibration screen is displayed.

(3) Calibrate the touchscreen.

(For calibration, tapping operations are required.  For

information on tapping, refer to page 15.)

"+" is displayed in the center, upper left, lower left,
lower right, and upper right portions of the screen, in
that order. Each time the "+" mark is displayed, tap the
center of the "+" mark with the stylus.
After the calibration procedure is executed (i.e., after
the five “+” marks are touched), the procedure ends
when  

   is pressed.

(4) Input the correct date, time and time zone and tap [Ap-

ply] or [OK] for your settings to take effect.

(5) Adjust the LCD brightness. (

page 16)

* This 

computer

 uses Microsoft

®

 Windows

®

 CE Operating System.