Panasonic cq-df802w Manuel D’Utilisation

52

53

1

2

2

8 Trim plate

Remove the trim plate 8 with a screwdriver.
≥

Remove the unit with a lock cancel plate <.

1

2

3

4

Contact

The security indicator blinks when the removable
face plate is removed from the unit.

Active the security function in the function settings.
(

➡

page 38)

This alarm sounds to warn you not to forget to re-
move the panel before leaving your car. This func-
tion is activated when the security indicator is on.

1 Slide the left side of the removable face plate in

place.

2 Press the right end of removable face plate until

“click” is heard.

Caution:
≥

This face plate is not waterproof. Do not expose it to water or excessive moisture.

≥

Do not remove the face plate while driving your car.

≥

Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.

≥

Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
contacts.

≥

If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.

≥

To avoid damaging the front panel, do not push it down or place objects on it while it is open.

This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
The security indicator will blink.

1 Switch off the power of the unit.
2 Remove the removable face plate. (

➡

page 52)

3 Gently press the bottom of the case and open

the cover. Place the face plate into the case and
take it with you when you leave the car.

1

2

7 Removable face plate case

Security indicator

MENU

OPEN

BAND

APM/ 

;

/ 

1

[

'] (Release)

1 Press [

'] (release). 

The removable face plate will be released.

2 Pull on the right side of the unit.

1 Fit the screwdriver into the hole of

the trim plate.

2 Insert the screwdriver until “click” is heard.

2 Pull out the unit while pushing the

plates further inside.

1 Insert the lock cancel plates 

< along

the grooves on both sides of the main
unit until “click” is heard.

“Click”

Contact

Note:
≥

Be sure to keep the front panel with the removable face plate case (included) when it has been detached
from the main unit.

≥

Take care not to drop the front panel when it has been detached from the main unit. Also take care not to
bump the top surface of the touch panel into anything. If you do so, you may break the glass on the top sur-
face of the touch panel.

< Lock cancel plate

Insert the tab end
in the outer
groove.

Screwdriver