Panasonic dvd-s38 Manuel D’Utilisation
18
Playback Features
Tips: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
Starting disc playback
1
Turn on the TV and select the correct
video input.
2
Press
POWER ^/l to turn on the DVD
player.
3
Press
OPEN/CLOSE ; to open the disc
tray.
4
Place a disc into the disc tray with the
label facing up, then press
OPEN/CLOSE
; to close the disc tray.
For double-sided discs, load the side
which you want to play facing up.
which you want to play facing up.
5
Playback may start automatically.
If not, press
PLAY/PAUSE q/h.
If a disc menu appears on the TV, see
next page > Using the disc menu.
If the child lock was activated for the
inserted disc, you have to enter your four-
digit password (see DVD Menu options >
Password). ( page 28)
See the next few pages for other
playback features under ‘ Playback
features ’.
next page > Using the disc menu.
If the child lock was activated for the
inserted disc, you have to enter your four-
digit password (see DVD Menu options >
Password). ( page 28)
See the next few pages for other
playback features under ‘ Playback
features ’.
Tips:
Do not overturn the DVD player while
disc loading, playing or ejecting.
Do not close the disc tray manually
even if the power switched off.
disc loading, playing or ejecting.
Do not close the disc tray manually
even if the power switched off.
–
–
Basic playback controls
Unless otherwise stated, all operations
described are based on remote control use.
described are based on remote control use.
Pausing playback
1
During playback, press
PLAY/PAUSE q/h
to pause playback and display a still picture.
Sound will be muted.
2
To resume normal playback, press
PLAY/
PAUSE q/h again.
Skipping title/chapter/track
To select sequentially
Press
Press
SKIP u / i to go to the
previous or next title/chapter/track.
To select directly (chapter/track only)
Use the
Use the
numeric keypad (0-9) to enter
valid chapter/track number.
e.g., 5: 5
e.g., 5: 5
15:
>= 10
1
5
Stopping playback
Press
STOP g.
The stopped position is memorized.
Resume play function
Press
Press
PLAY/PAUSE q/h to restart from
this position.
The position is cleared if the tray is
opened or you press
opened or you press
STOP g several
times to display ‘g’ on TV’s display.
Tips:
Screen saver will start automatically if
the disc playback is stopped for about
5 minutes.
The player will automatically switch
to Power Standby mode if you do not
press any buttons for about 25 minutes
after the disc has stopped playing.
the disc playback is stopped for about
5 minutes.
The player will automatically switch
to Power Standby mode if you do not
press any buttons for about 25 minutes
after the disc has stopped playing.
–
–
18
DVD-S58_S38_PP-En.indd 18
DVD-S58_S38_PP-En.indd 18
2010/01/12 10:53:05
2010/01/12 10:53:05