Panasonic KX-TD500 Manuel D’Utilisation
TIE Line Features
370
Features Guide
3.1
TIE Line Features
Outside (CO) Line and TIE Line Connection
Description
TIE lines are usually used to link two or more distant locations where high volume calling
traffic exists. However, a person at a location outside of the TIE Line Network can also use it
by first making a CO call via public network to the nearest point of TIE Line Network for the
purpose of saving the toll call charge.
traffic exists. However, a person at a location outside of the TIE Line Network can also use it
by first making a CO call via public network to the nearest point of TIE Line Network for the
purpose of saving the toll call charge.
1. When a caller makes a CO call via DISA line
Call Flow
1.
Employee-1 at a local branch makes a CO call to PBX-1 via DISA line.
2.
Employee-1 dials "77" (TIE Line Access Code).
3.
Employee-1 dials 951-1000.
4.
Employee-1 at a local branch will be connected to Ext.1000 of PBX-2.
Programming example:
To make up the TIE Line Network above, the following System Programming is required at
PBX-1 and -2 respectively.
To make up the TIE Line Network above, the following System Programming is required at
PBX-1 and -2 respectively.
PBX-1
•
2.7 Trunk to Trunk Restriction
•
8.2 TIE Routing Table
– PBX Code: 950
PBX-1
TIE Line
PBX Code 950
PBX-2
TG10
PBX Code 951
Ext. 1000
DISA
Inside of the TIE Line Network
TG10
Local
Branch
Branch
Employee-1
CO